Home » Ski Services

Ski Services

About GOSKAND Ski and Snowboard Tuning, Waxing, Binding Mounting & Repairs:SKI SERVICES

Our shop technicians are fully qualified to perform all of our available services on your equipment & have received ski binding certification from Salomon, Marker, Rossignol, Atomic, & Tyrolia. We guarantee your satisfaction with our work, & look forward to extending the life of your skis & snowboards by giving them the proper care and service. Our service-shops offer the latest tuning technology by Wintersteiger to ensure your skis will be tuned to factory standards.

Ski Services Include:

·Ski Binding Inspection, Binding Mounting and Binding Function Testing (DIN Testing)
·Ski Tuning
·Ski Waxing
·Base Repair, Edge Replacement and Tunes/b>
·Free Ski Binding Installation with purchase of new skis from Goskand Ski Shop

Service and Repair Pricing

Basic – $30.00
• Sand-grind base
• Sharpen edges
• De-tune tip and tail
• Hot wax with high power roto-brush finish


Our Machines:

GOSKAND Ski Shop takes pride in every piece of equipment we work on. The tunes and mounts are all done by hand with the assistance of our Wintersteiger machines, which include: Wintersteiger Micro 90 to flatten and structure skis,Trim Disc to sharpen and polish edges, Polyman to fill scratches, a Skitronic to test bindings, and a Wax Jet to put a fresh coat of wax on the freshly mounted skis.
Between our people and our machines, your gear will be ready for the winter. Just bring your gear down to us and we will help you pick out a service that fits needs.


Ski Mounting & Snowboard Mounting:

Standard Ski Mounting
Measure and mark mout location, set jug, drill ski, add glue in holes, mount bindings, adjust forward pressure, set DINS, function test binding, belt wax.
Glue and lpug old holes, determine best mounting location, set jig, drill ski, add glue in holes, mount bindings, adjust forward pressure, set DINS, function test bindings, belt wax.
Binding Adjustment & Test
Adjsut binding to the boot, set DINS, and function test, belt wax.
Standard Snowboard Mounting
Mount bindings to board and adjust straps.


Ski Tuning & Snowboard Tuning:

Edge & Wax Kids Ski
Side edge, detune, hand wax, and scrape.
Hot Wax
Hand wax the ski or snowboard, scrape extra wax off, polish base
Belt grind base, side edge, hand wax and scrape.
Minor Ptex, belt grind base, side edge, hand wax and scrape.
Minor Ptex, belt grind base, side edge, stone grind finish structure, ceramic edge finish, hand wax and scrape.



Skin Trim
Cut the skins to match the ski profile, and attach tip and clips if needed.
Splitboard Binding Mount
Mount binding pucks to riders angles and width, install tour mode and heel risers, adjust binding to fit boot.



Starts at $10
Core Shot/Base Weld
Starts at $10
Edge Repair
Estimate Only
Base Patch
Estimate Only
Epoxy Work
Starting at $15
Hourly Shop Rate


Terms explanation: What’s the difference between a Stone Tune and a Belt Tune?

While a Belt Tune yields a smooth base, a Stone Tune adds “structure”, or a more complex shape than a belt tune. This structure results in better performance and greater durability of the finish on the base.


Belt Hot Wax – An automated machine driven process the leaves your ride fresh and ready. The basic quick wax. (wax applied by heated belt, scraped, and buffed)


Hand Hot Wax – The hand wax offers a fine attention to detail that can’t compare to a heartless machine. We’ll be sure to cover those hard to reach places. For the hand wax, we use temperature specific wax that is applied by iron and thoroughly heated, cooled, scraped, and then brushed with a bronze brush. Then it’s brushed again with nylon and finally horse hair. Very thorough.


Belt Grind –  The belt grind is a form of base flattening using 5 different gritted lubricated belts. It removes imperfections; it also smoothes and flattens out base of ski or board so you’re reducing friction and getting a smooth ride.


Edge Grind –  Our edge grind is a form of side edge beveling and sharpening that leaves your edges in prime condition for tearing through snow. In addition this process also removes oxidation and knicks any burrs off edges by grinding the ski or snowboard against a lubricated beveled belt.  The result is edges that perform better and last longer.


Base Weld – When a rock or other element damages the bottom of your ride, it can leave a deep enough impression in your base to expose the ski or snowboard’s core. This is affectionately known as a core shot. The process of fixing a core shot involves heating, laying and compressing new base material into the repaired area to seal from water and protect the core of the ski or board from the elements so your ride will propel you down the mountain consistently for years to come.